Our technicians run routes covering the greater San Antonio metro and beyond. Mileage is charged at $3/mile to and from your location.
San Antonio
Austin
New Braunfels
Boerne
San Marcos
Seguin
Spring Branch
Houston
Converse
Schertz
Cibolo
Bulverde
Kerrville
+ Surrounding Areas
Home ยท Our Services + Parts
Services & Parts
On-site heavy equipment repair, maintenance, and parts for all major brands โ since 1999.
About the Company
What We Offer
A.L. Boeck & Co. is a fully mobile, on-site heavy equipment repair company serving San Antonio and surrounding Central Texas communities. Established in 1999 with a single goal: be the best. More than 25 years later, we've earned that reputation through consistent quality, transparency, and a client roster full of repeat customers.
All Major Equipment Brands
Flat-Rate Transparent Pricing
Emergency & Weekend Service
Work Fully Warranted
Custom Engine Rebuilds
100-Ton Track Pin Press
Pricing
Clear, Flat-Rate Labor.
Standard Rate
$175
Per Hour
For repair work scheduled at least 3 business days in advance. Mileage charged at $3/mile to and from your location.
Emergency Rate
$325
Per Hour
Same-day, weekend, and holiday service. We're here when the project can't stop โ at any hour.
Mileage
$3
Per Mile
Charged both directions. Estimates available upon request before scheduling.
* Estimates are provided upon request. Additional worn or damaged parts discovered during inspection may affect the final cost. We communicate openly before proceeding.
Capabilities
Full-Scope Repair Work
Mechanical Repair
Comprehensive diagnosis and repair of mechanical systems on all major equipment brands. We assess honestly, explain clearly, and fix it right the first time.
Hydraulic Systems
Hydraulic cylinder rebuilds, pump and motor repair, valve troubleshooting, and wet kit installations for rock breakers, grapples, thumbs, and conveyors.
Diesel Engine Rebuilds
Custom engine rebuilds performed to spec. We rebuild transmissions, final drives, and all powertrain components for long-term durability.
Electrical & Diagnostics
Full electrical system troubleshooting, wiring repair, and diagnostic scanning using industry-grade equipment.
Undercarriage & Track
On-site track repair using our portable 100-ton track pin press. Undercarriage inspection, component wear assessment, and parts supply.
Specialty Equipment
We handle specialty equipment including milling machines, scrapers, and road construction equipment โ not just standard excavators and dozers.
Parts Sales
We Sell Parts.
A.L. Boeck & Co. carries a wide range of high-quality aftermarket parts for heavy equipment across construction, mining, agriculture, and beyond. From hydraulic components and engine parts to electrical systems and undercarriage components โ sourced from trusted manufacturers at competitive pricing.
Save Thousands vs. OEM Pricing
Our aftermarket parts give you real value without cutting corners on quality. Contact us with your equipment make, model, and what you need โ we'll find it fast.
Everything you need to know before scheduling a repair.
01
We Come to You
No hauling, no tow fees โ we bring the shop to your job site.
02
All Brands Serviced
Cat, Komatsu, Deere, Hitachi, Volvo, Case, Terex and many more.
03
Flat $175/hr Rate
Transparent pricing, no surprises. Estimates available on request.
04
24/7 Emergency Service
Same-day, weekend & holiday response available at $325/hr.
05
Custom Rebuilds
Engines, transmissions, final drives, hydraulic cylinders โ all rebuilt in-house.
06
Work Warranted
Every repair is backed by our warranty. If it's not right, we make it right.
The easiest way is to call us at (830) 556-9416. You can also submit a repair request online. We'll gather your equipment details, location, and discuss the problem so we can dispatch the right technician with the right tools.
We charge a flat $175/hr for standard repair work, plus $3/mile (to and from your location). Estimates are available on request. Additional worn or damaged parts discovered during inspection may affect the final total โ we'll always communicate before proceeding.
Standard rates apply when repair work is scheduled at least 3 business days in advance. For same-day, weekend, or holiday service, our emergency rate is $325/hr. Equipment breakdowns don't follow a 9-to-5 schedule, and neither do we.
We accept check, debit, and major credit cards โ Visa, MasterCard, Discover, and American Express. For credit card payments, please complete our Credit Card Authorization Form and email it to alboeckco@gmail.com.
Yes โ new customers are asked for a 25% deposit at scheduling, payable by debit or credit card. Returning customers are billed upon job completion.
We do not bill until work is completed, so refunds are not issued. We warranty our work, so if something isn't right, we'll make it right.
Yes. We service all major brands including Caterpillar, Komatsu, John Deere, Volvo, Hitachi, Case, Terex, Bomag, Ditch Witch, Vermeer, Kubota, JCB, Ingersoll Rand, Kobelco, Dynapac, Sakai, and many more. If it runs on a job site, we've likely worked on it.
We operate throughout Central Texas including San Antonio, Austin, New Braunfels, Boerne, San Marcos, Seguin, Spring Branch, Houston, and surrounding communities. Mileage is $3/mile to and from your location.
We stand behind the work we perform and the parts we supply. However, our warranty applies specifically to the repairs completed โ it does not extend to cover additional parts or labor that may be required after work has begun. Once a repair is underway, worn or damaged components that were not visible or evident during the initial inspection may be discovered. These findings cannot be anticipated in an estimate and will be communicated to you before we proceed. Parts prices are also subject to change without notice. We will always keep you informed of any changes before additional work is authorized.
Sometimes a customer needs their machine back in service as quickly as possible and chooses a temporary "patch" repair rather than a full replacement. We are happy to accommodate that โ but it is important to understand that patch or temporary repairs are not covered under warranty. A patch fix is intended solely to keep the machine operational in the short term. We will always be upfront with you about whether a repair is a permanent, warranted fix or a temporary measure, and we recommend following up with a full repair as soon as your schedule allows.
Your information will not be sold, exchanged, or transferred to any other party without your consent, except for the express purpose of fulfilling the service you requested.
Still have questions? Reach out directly.
Home ยท Gallery
Work in the Field
Real job sites, real equipment, real results โ Central Texas since 1999.
CAT Excavator โ Evening Job Site ยท San Antonio
Komatsu PC1250 โ On-Site Service
Motor Grader Teardown โ Service Truck Crane
Service Truck โ On-Site Field Repair
Track Pin Press โ Hitachi Excavator
CAT 299D Skid Steer โ Hydraulic Repair
Scraper Transmission โ Gantry Crane Work
Excavator Undercarriage โ Service Truck On-Site
Engine Rebuild โ Shop Work
Valve Train Service โ Field Work
Road Milling Machine PR-800-7 โ Service
Major Engine Overhaul
Excavator Cab Removal
Transmission Pull โ Service Truck Crane
Case 621E Wheel Loader โ Field Repair
CAT ET / John Deere SA Diagnostics
CAT Motor Grader โ Service Call
Engine Bay โ Open for Inspection
On-Site Excavator Repair
Early Service Truck โ Scraper Repair
CAT Dozer โ Job Site
Undercarriage โ Track & Sprocket Detail
Motor Grader โ Blade & Circle Drive
Wheel Loader Bucket โ Job Site Detail
CAT 320B โ Hydraulic Rock Breaker ยท San Antonio
Engine Block & Cylinder Head โ Shop Teardown
CAT Wheel Loader โ Bucket & Linkage Repair ยท San Antonio
Diesel Engine โ Crankshaft & Block Rebuild
Axle & Final Drive โ Drivetrain Rebuild
Chain Trencher โ On-Site Service Truck ยท San Antonio
Home ยท Careers
Now Hiring
Join a team that's been doing this right since 1999 โ immediate positions available.
Open Position
Heavy Equipment Technician / Mechanic
Starting at $40/hr+
Compensation based on experience. Full benefits, paid vacation, and holiday time. Company service truck driven home daily.
You'll operate from a fully-equipped service truck, traveling to customer job sites across the San Antonio metro and surrounding Texas communities. Every day brings different equipment, different problems, and the satisfaction of getting a machine running again.
SCHEDULE
Monday โ Friday, approximately 8โ12 hours per day
Responsibilities
Diagnose and repair complex equipment involving mechanical, hydraulic, diesel, pneumatic, and electrical systems
Assess equipment honestly and develop a clear plan of action before beginning work
Communicate repair cause and correction directly with customers on-site
Maintain professionalism and a clean, organized service truck at all times
Complete accurate time, mileage, and machine documentation records
Address customer concerns with care and clarity during and after repairs
Requirements
5+ years of experience as a heavy equipment or diesel mechanic, preferably in the field
Must provide own tools and know how to use them safely and effectively
Ability to diagnose complex mechanical problems and execute successful repairs
Dependable โ on time, every shift
Strong communication skills with customers, supervisors, and job site personnel
High safety consciousness and clear understanding of equipment safety protocols
Valid driver's license with a satisfactory driving record
Basic computer skills for documentation
Physical Requirements
Ability to occasionally lift and/or move over 100 lbs
Work in confined spaces as required by the machine being serviced
Sufficient dexterity to operate hand tools efficiently
Walk and stand for the majority of the workday
Ability to drive manual transmission vehicles
We set our techs up for success.
Competitive pay, performance-driven raises and bonuses, a full benefits package, and a team that takes pride in doing the job right.
